Stiga MT 500e Cordless Multi-Tool Kit - Hedgetrimmer and Pruner 48v - Complete with 5 Year Warranty
The MT 500e is a light and powerful cordless multi tool comprising a telescopic shaft, hedge trimmer attachment and pruner attachment that can easily trim and prune hard to reach bushes and trees. Powered by a 48V battery, this sturdy garden multi tool will give you up to 50 minutes trimming time, or 20 minutes pruning time, on one charge (48V,5Ah). And with a 112° rotating cutting head, you'll easily find the most comfortable working angle for you.
Special Features Stiga MT 500e Cordless Multi-Tool Kit - Hedgetrimmer and Pruner 48v
Lightweight battery multi tool for hedge cutting and pruning
112° rotating cutting head, soft touch rubber grip handle and shaft
75cm telescopic extension reaches 2.95m - hedge trimmer and 2.70m - pruner saw
46cm dual action laser-cut hedge trimmer blade and 25cm pruner cutting bar
5-year warranty (T&C's Apply)
Battery powered -cable-free
This cordless multi tool is perfect for smoothly cutting and pruning bushes and trees, free from trailing cables.
Handy, extendable telescopic shaft
High bushes and trees? No problem. Just pull out the 75cm extension shaft to the length you need – reaching a maximum height of 4.30m with the hedge trimmer blade, and 4m with the pruner saw.
Forget about climbing ladders and trees. The MT 500e lightweight cordless multi tool gives you high-reach-battery powered hedge cutting and pruning – free from the noise and fumes of a typical petrol multi tool. Driven by a powerful 48V battery, the MT 500e and its 46cm durable dual-action laser-cut blade and 25cm cutting bar, will slice smoothly through your garden foliage.
To reach those lofty trees and hedges, this garden multi tool comes with a 75cm telescopic extension, giving you a maximum reachable height of 4.30m with the hedge trimmer and 4m with the pruner saw. A high-performance chain on the cutting bar also minimises kickbacks. It's comfortable too, thanks to its six-position 112° rotating cutting head, letting you tackle plants from strain-free angles. And with a soft touch rubber grip handle and shaft, and harness hook, you'll complete your tasks without harming your hands and limbs. For a safe, comfortable and precise cut, the MT 500e features a bumper under the guide bar, for leaning against branches while you work.
A 5-year manufacturer's warranty is included with this model (T&C's apply).
Frequently Asked Questions
What type of maintenance should be done on the saw accessory tool?
To ensure the garden multi tool is functioning correctly and to maximise its lifetime, we recommended that you clean the battery housing and contacts, as well as the space behind the bar cover regularly (depending on the frequency and intensity of use), as dirt and sawdust constantly build up in these areas.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
Do the cutting blades need maintenance or sharpening?
Cutting (especially cutting hedges) leads to the accumulation of detritus and dirt between the blades. Without the necessary maintenance, this issue can reduce cutting performance.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade. Please see the user manual for more information on this point.
The blades of the hedge cutting accessory seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
What should I do when it is not being used?
During the times when it is not being used, we recommend you clean the teeth of the cutting element and place the garden multi tool in a safe place, ensuring you protect the blade within their storage area.
Technical Specifications Stiga MT500e Cordless Multi-Tool Kit - Hedgetrimmer and Pruner 48v
General info
EAN/UPC 8008984855373
SKU 278720008/ST3
Level Experience
Power
Power source Battery
Number of batteries included 1 / 2 Ah
ePower Yes
Power 0.4 kW
Voltage 48 Volt
Battery kit - Included
Motor type With brushes
Power (hedger function) 0.4 kW
Power (pruner function) 0.4 kW
Lithium battery nominal energy 86.4 Wh
Hedger working time (+/- 20%) 20 min
Pruner working time (+/- 20%) 8 min
Cutting system
Cutting length 44 cm
Blade length 46 cm
Blade type Dual action - Laser cut
Blade teeth speed 3000 spm
Teeth distance 28 mm
Cutting capacity (diameter) 18 mm
Blade rotation angle 112 °
Bar type Sprocket nose
Bar length 25 cm
Bar length (inches) 10 in
Chain type 3/8" .050" (91PX040E)
Chain speed 5 m/s
Chain oil tank capacity 0.085 l
Chain oil pump Automatic
Chain tensioning system Front screw tensioning
Equipment
Handle type Rear handle
Vibe Control System (VCS) No
Hedger attachment Yes
Soft grip handle Yes
Shaft extension 75 cm
Telescopic handle extension length (max) 295 cm
Harness Single
Pruner attachment Yes
Tools kit
Battery charger Single standard
Battery charger output current 1.5 A
Battery charger plug type Europlug (Type C)
Overall dimensions
Pack weight 10.04 kg
Product weight (hedger version) 5.7 kg
Product weight (pruner version) 5.2 kg
Product length 2350 mm
Product width 120 mm
Product height 130 mm
Weight 4.7 kg
