Stiga BC 700e B Cordless Brushcutter Kit - Bike Handle 48v / 4.0Ah - Complete with 5 Year Warranty
Weighing just 5,5kg, the BC 700e B is the first ‘bike’ brush cutter in the STIGA battery range. The 48V 4Ah battery provides up to 60 minutes of non-stop cutting on a single charge. While its lightweight, robust build and smart, ergonomic features meet the most challenging cutting jobs with ease.
Uneven ground, steep slope or deep ditch? With five harness hook positions, this brush cutter gives you balance and control wherever you are working. For added strength, the cutter is built using light alloy tube, robustly resistant to bending and vibrations. Use the handle keypad with LEDS display and the trigger switch to set the speed. At 6000 rpm the Bump & Work dual line cutting head gets to work. Or push a button and the 3T arc blade kicks in, delivering 6500 rpm for tougher cutting challenges.
And with a 38cm cutting width and high torque, this cutter can slash through thick, high and even wet grass with ease.
A 5-year manufacturer's warranty is included with this model (T&C's apply).
Included in the kit-
Stiga BC700e B Brushcutter
Stiga E 440 48V 4.0Ah Battery
Stiga EC 415 SU Battery Charger
Easy action speed control
Push the trigger on the handle to safely adjust the speed from 6000 rpm - 6500 rpm to match the cutting conditions.
Intuitive keypad
From checking battery power, to switching on and off safely. All you need to control the brushcutter is on the handle’s electronic control panel.
Two types of cutting head – work harder than one
When the vegetation gets tough, the cutting head switches from the easy loading nylon dual line to the tough 3T blade, included as standard.
POWER
* Suggested battery capacity: 4 Ah
* Power source: Lithium-ion battery
* Power: 0.5 kW
* ePower: Yes
* Voltage: 48 Volt
* Battery kit: 4Ah battery included in kit
* Motor type: Brushless
* Maximum motor speed: 6000 rpm
* Lithium battery nominal energy: 172.8 Wh
* Working time (+/- 20%): 30 m
CUTTING SYSTEM
* Nylon line diameter (millimeter): 2
* Cutting width: 38 cm
* Cutting angle: Fixed
* Nylon head type: Tap & Go dual line easy load
* Nylon line length: 4 m
* Blade type: 3T ARC
* Blade diameter: 255 mm
EQUIPMENT
* Handle type: Bike
* Shaft type: Straight
* Shaft tube diameter: 25 mm
* Soft grip handle: Yes
* Harness: Double Comfort
TOOLS KIT
* Battery charger: Single standard
* Battery charger output current: 1.5Ah
Vibration and noise data
* Vibration level front handle (m/s2): 2.89
* Measured sound power level dB(A): 86
* Measured sound pressure level at operator ear dB(A): 76.9
* Vibration level rear handle (m/s2): 3.69
* Guaranteed sound power level (LwA) - dB(A): 96
OVERALL DIMENSIONS
* Pack weight: 9.1 kg
* Product weight without battery: 6 kg
* Product length: 1680 mm
* Product width: 650 mm
* Product height: 180 mm
There is an offer on this product - Free Extra Battery, Claim required.
Read About It Here.
Ends 31-May-2025, or whilst stocks last.
